StarSat SR-5090HD Extreme is a budget-friendly Full HD satellite receiver. A "dump" file for this device is essentially a full backup of its flash memory (8MB), which is used to restore the unit if it becomes stuck on "Boot," "ON," or fails due to a corrupted software update. Technical Specifications Resolution: Full HD 1080p 50/60Hz.
Only the power indicator LED glows, and the screen remains completely black.
Which do you have available (a USB-to-RS232 cable or a CH341A programmer)?
(usually MT7601 or RT5370) for online features like YouTube. Official Downloads : Reliable software can typically be found on sites like Software-Sat StarSat Support for the RS232 recovery method? Star Sat SR-5090HD Extreme Satellite Receiver User Manual
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. dump starsat sr5090 hd extreme
The data transfer bar should begin moving. Wait until it reaches 100% and displays a "Success" message. Unplug the serial cable and reboot your device. Important Safety Tips and Troubleshooting
A secondary computer with the CH341A Programmer software installed. Step-by-Step Guide
Once your receiver is set up perfectly with your preferred channel configurations, go to Menu > Software Update > Backup to save your own working dump file onto a USB drive for emergencies. To help find the exact variant you need, let me know:
If the bootloader inside the receiver is still partially functioning, you can flash the dump file using a serial null-modem cable without opening the box. Requirements: StarSat SR-5090HD Extreme is a budget-friendly Full HD
Insert your USB drive into a PC, right-click it, select Format , choose FAT32 , and click Start .
Pre-configured satellite transponder lists and data configurations
If your device is working, you can create your own backup text/bin file: Insert a formatted FAT32 USB drive. Go to .
Use a compatible loader tool (typically for GX6605S chipsets) to flash the dump file directly. Flash Programmer (Expert) Only the power indicator LED glows, and the
If your device is stuck on boot ("ON" or "Boot" message), you can recover it using a USB flash drive: Prepare the File: Download the official firmware (dump file) for the SR-5090HD Extreme StarSat official site Rename for GX Chip: This model typically uses a GX chip. Rename the downloaded Setup USB: Format a USB drive to FAT32 and copy the file to the root directory. Flash Process: Turn off the receiver's power. Insert the USB drive. Press and hold the Power button
Always verify the file checksum (MD5/SHA) against known good releases from reputable satellite forums like , Sat-Universe , or LegitFta .
What is your receiver showing?
