Resetter — Epson M2120

An (also known as the Epson Adjustment Program) is the exact utility tool you need to clear this error, reset the counter to 0%, and get your printer back to work instantly without paying for expensive technician fees. What is the Epson M2120 Resetter (Adjustment Program)?

Before proceeding, make sure you have the following:

Remember to only download software from trusted sources to avoid malware.

Epson printers are equipped with internal sponges, known as or ink absorbers , that capture excess ink from print head cleaning cycles and other maintenance routines. Over the life of the printer, these pads slowly fill up. To prevent ink from overflowing and damaging the internal electronics, Epson's firmware includes a waste ink counter . This counter tracks the estimated ink volume absorbed. When it reaches a pre-set threshold (usually 100%), the printer performs a protective lock-up, displaying the service error. Epson M2120 Resetter

Enter the Reset Key into the application and click the button to start the reset process.

The Epson EcoTank M2120 is a highly efficient monochrome all-in-one printer. However, like all Epson inkjet printers, it features a built-in safety mechanism that automatically halts operation after printing a specific number of pages. When this limit is reached, your printer will stop working and display errors indicating that a service is required.

A: You can reset it indefinitely, but after 2–3 resets, the physical pads will be completely saturated and must be replaced. Ignoring this will damage the printer permanently. An (also known as the Epson Adjustment Program)

You can reset the counter as many times as needed. However, after multiple resets, it's wise to physically inspect or replace the waste ink pad to prevent actual overflow.

The Epson M2120 Resetter is a software utility designed to reset the internal Waste Ink Pad Counter back to 100%. This counter estimates how much ink has been absorbed by the waste pads during cleaning cycles and borderless printing.

Calibrates the bi-directional alignment to eliminate blurry or jagged text. Epson printers are equipped with internal sponges, known

The (often called a "WIC Reset Utility" or "Adjustment Program") is a software tool designed to reset the printer’s internal waste ink pad counter. Unlike older cartridges, the M2120 is a tank-based system. It has a built-in "maintenance box" or an absorbent pad that collects ink used during head cleaning cycles.

If your M2120 stops printing and shows the error, taking it to a service center can be costly and time-consuming. Using a resetter tool offers several advantages: