The Sinotimer TM-630S is a 7-day digital programmable timer switch capable of managing high-current loads up to 30A. It features 1-second setting intervals and a low-power CMOS chip for high accuracy. Capacity: 30A Resistive. Timing Range: 1 second to 168 hours. Programs: Up to 28 ON/OFF settings per day.
The first step in any is setting the current date and time. Do this before entering any programs.
The timer runs automatically based on your programmed schedules. Advanced Features 12-Hour / 24-Hour Clock Toggle
The TM-630S is packed with features that make it a standout choice for precise time-based control:
Press repeatedly until the correct day of the week shows at the top. Press H+ to set the current hour. Press M+ to set the current minute. Release the Clock button. Step 2: Set the Timer Schedule (ON/OFF Events) Press P once. The screen will display 1 ON on the left.
Pressing this button switches the operating mode between , AUTO , and OFF .
Lights up red when the internal relay is closed (power is flowing to the load). How to Wire the Sinotimer TM-630S
Verify your day combinations match exactly between the ON cycle and the OFF cycle (e.g., if 1_ON is set to "Mon-Fri", 1_OFF must also be set to "Mon-Fri").
Built-in CR2032 lithium battery keeping time/settings intact for up to 90 days during blackouts.
The TM-630S usually features a :