I understand you're looking for help with USB drivers, likely for professional vehicle diagnostics.
Choose "Browse my computer for driver software" and point it to the
Follow these steps to manually install or update your Autocom CDP USB drivers on Windows. Step 1: Connect the Hardware Connect the USB cable to your Autocom CDP main unit.
: Click Next and follow the prompts. Once finished, the device should appear as a "VCI (Diagnostic Unit) Serial Port" or similar. Safety Warning autocom cdp usb drivers download top
Ensure the USB security dongle is inserted into an available USB port on the computer.
Right-click the device and select Update driver .
: Includes a "VIN Decoder" to automatically select the correct model year and a "Voltage Check" that alerts you if the vehicle's battery level is too low for safe diagnostics. Driver & Software Setup I understand you're looking for help with USB
Browse to the location where you extracted your downloaded drivers (or your Autocom program files folder).
The quest for ends with knowing what your hardware needs, where to fetch clean driver files, and how to install them correctly. A top driver is not just about functionality—it ensures accurate diagnostics, faster data throughput, and longer interface lifespan.
This is the most reliable and often overlooked source for the correct drivers. Once you have run the Autocom Cars installer (even if it failed partially), it extracts driver files to your hard drive. : Click Next and follow the prompts
Obtain the full software package from the Autocom official releases page ( https://autocom.se/en/releases ). If the software package is not available directly, third-party drivers from the table above can be used.
To use your (Compact Diagnostic Partner) tool, you must install the correct USB drivers to ensure your PC can communicate with the vehicle's electronic control units (ECUs). These drivers typically create a Virtual COM Port (VCP), often using FTDI chips, allowing diagnostic software to treat the USB connection like a standard serial port. Where to Download Drivers
Windows 10/11 may block unofficial drivers. You may need to disable Driver Signature Enforcement in Windows startup settings to install older, unofficial drivers.
: Since many CDP interfaces use FTDI chips, you may also need the Virtual COM Port (VCP) drivers
: For users with a valid license, download the full installation package (which includes drivers) directly from the Autocom Technical Support page.