Sony Lbt-v702 Specs -
Switchable "Super Dynamic Bass" (SDB) circuit providing low-end boost centered around 50 Hz. Tuner and Signal Reception Section
Based on technical documentation, the Sony LBT-V702 offers a wide array of connectivity and audio shaping tools:
Depending on the specific region and package, this stack system typically included: Sony TA-V702 AM/FM Tuner: Sony ST-V702 Cassette Deck: Sony TC-V702 Record Player: Sony PS-V702
The Sony LBT-V702 is a "Midi-sized" Hi-Fi component system originally released in the early 1990s. Known for its sleek black aesthetic and comprehensive audio capabilities, this system includes a dedicated amplifier, synthesizer tuner, dual cassette deck, and CD player.
0.05% at 10W output (1 kHz).
For under $100–$150 in working condition, the LBT-V702 is an absolute steal for a garage, workshop, or retro game room. While it won't match the sterile accuracy of a modern hi-fi, it has "character"—something no spec sheet can fully capture.
Supports FM stereo, MW, and LW bands with .
The beating heart of the system is its powerful integrated amplifier section. Utilizing an STK series audio amplification chip, the system delivers high headroom and a distinctly warm 90s sound signature. Specification ~35 to 50 Watts per channel into 6Ω or 8Ω (Stereo) Phono Input Stage Moving Magnet (MM) compatibility Headphone Out Front-panel 6.35mm (1/4") stereo jack Microphone Input 6.35mm mono jack with dedicated mixing controls Rear Line Inputs 1 x Phono (MM), 2 x Line-level (Aux/Video), 1 x Tape Loop
Approximately 14.5 kg (32 lbs) excluding speakers. sony lbt-v702 specs
The LBT-V702 features a dual deck for dubbing. It is important to note that Deck A is usually playback-only, while Deck B is playback/record.
Below are the detailed technical specifications and features for the primary components of the Integrated Amplifier: Sony TA-V702
Features a built-in RIAA phono pre-amplifier stage, allowing you to connect a modern or vintage vinyl turntable directly without buying external gear.
The is a vintage Midi-sized Hi-Fi component stack system released in the early 1990s. 📢 Speaker Specifications (SS-A701) System Type: 3-way bass reflex system Supports FM stereo, MW, and LW bands with
Leo saved for four months. When he finally brought the box home, it was heavier than a dead engine block. His father raised an eyebrow. “That, or a muffler,” Leo said. His father just grunted.
: Auto-reverse playback (Deck B), high-speed dubbing, and Dolby B Noise Reduction. Frequency Response : 40 Hz – 15,000 Hz (using Type I normal tape). 5. Loudspeakers (SS-V702) Configuration : 3-Way, Bass-Reflex system. : 17cm (approx. 6.75") cone type. : 5cm (approx. 2") cone or horn type. Super Tweeter : 2cm dome type. : 6 or 8 ohms (standard for LBT series). 6. Physical & Power Power Requirements
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The tape and radio components provide extensive analog versatility, highly sought after by retro media collectors. their policies apply.