Atlas Copco: Elektronikon Mk5 Manual

Utilizes physical hardwired connections to external switches for starting, stopping, or switching pressure bands.

If the manual does not provide a clear solution or the same error persists after troubleshooting, it is time to contact a qualified technician.

Scroll down to the specific maintenance item (e.g., Oil Filter , Air Filter , Oil Service ). Press the key.

Save the changes. Ensure the differential between loading and unloading is wide enough to prevent rapid cycling. Configuring Timers

Perform required PM service (filters/oil) and reset the counter via the service menu. How to Reset a Fault Code Atlas Copco Elektronikon Mk5 Manual

The currently showing on the screen

Displays the remaining time until the next preventative maintenance interval (Service Plans A, B, or C).

After completing an oil change, air filter replacement, or oil separator service:

Configuring the Mk5 correctly ensures your compressor meets plant demand without wasting energy. The manual details several core programmable parameters: Pressure Band Configuration Press the key

Navigate to the specific sub-menu (e.g., Plan A, Plan B, or Plan C). Select the completed maintenance task.

Displays general status like outlet pressure and temperature. General Settings: Contains basic operational parameters.

Failure in pressure transducer or PT1000 temperature sensor.

Controls the transition delay from start-up configuration to full-load operation. 4. Troubleshooting Fault and Warning Codes fouled oil cooler

Low oil level; fouled oil cooler; blocked thermostatic valve.

Select the specific service plan (e.g., Plan A, Plan B, or Plan C).

Triggered by the thermal overload relay if the motor draws excessive current.