: If the PL-2303 driver fails to install correctly, you can attempt an alternative method. In Device Manager, right-click on the "Unknown Device," select "Update driver," then "Browse my computer for drivers." Choose "Let me pick from a list of available drivers on my computer" and locate the "Prolific USB-to-Serial Comm Port (version 3.2.0.0)" to install it manually.
You can find the software on Phipps Electronics or various electronics forums that host the Microbrn.exe package.
Before installing any software, you must understand that there are two major versions of the K150 hardware circulating the market.
The standard software for the K150 is usually called MicroBrn .
Open-source contributors have patched the original microPro software over the years. Look for versions labeled "microPro Windows 10 Fix" or "FixK150" on electronic hobbyist forums or GitHub. These builds include updated ChipData.cid files that fix memory access violations common to modern 64-bit systems. 4. Burning a PIC Chip: Step-by-Step Workflow k150 pic programmer software windows 10
Note: You must do this every boot or permanently disable Secure Boot in BIOS.
The K150 is a popular, low-cost USB microcontroller programmer used to flash Microchip PIC chips. While the hardware remains highly reliable for hobbyists, the original software was designed for older operating systems like Windows XP and 7. Running a K150 PIC programmer on Windows 10 requires specific drivers and software workarounds to overcome compatibility hurdles. 1. The Core Challenge: Drivers and Software
With the software connected to the hardware, you can now flash your HEX files. 1. Position the Chip Correctly
If the programmer shows in Device Manager under "Other Devices" with a yellow triangle, right-click and choose "Uninstall device." : If the PL-2303 driver fails to install
The K150 is a popular, low-cost PIC programmer that supports various Microchip PIC microcontrollers from the 10, 12, 16, and 18 series. While widely used, setting it up on Windows 10 requires specific attention to drivers and software configuration. The primary software for the K150 is Microbrn.exe .
often requires specific driver workarounds due to compatibility issues with its internal USB-to-serial chip. Key Software: Microbrn.exe
: Program HEX files into the PIC, read existing chip contents, and verify successful data transfer. Manage Fuses
Do not throw your K150 away. This 2,500-word guide will walk you through everything: identifying your clone vs. original, installing the correct signed drivers for Windows 10, finding working software (PICPGM, WinPic800, and the dreaded original CD software), and configuring settings to finally program your PIC microcontrollers. Before installing any software, you must understand that
Right-click the Windows Start menu and select Device Manager .
Lift the lever on the Textool ZIF socket. Place your PIC chip into the socket, aligning Pin 1 with the top of the lever side according to the diagram displayed inside the Microbrn software window. Lower the lever to lock it.
and enter the COM port number assigned to the programmer in Windows Device Manager. Programmer Selection File > Programmer and ensure is selected. Operations : The software allows you to a HEX file, existing firmware, and successful writes. Key Hardware Features davemaster/PIC-USB-Programmer-K150 - GitHub