That said, I will provide a about ASTM D5957-98 — its purpose, scope, history, how to legally access it, and practical alternatives — written to help you understand the standard thoroughly without violating copyright.
: If the water level drops, you must factor in weather conditions. Place a calibrated control bucket filled with water next to the test area to measure local evaporation rates.
: Many engineering firms, architectural offices, and construction companies maintain corporate subscriptions to the ASTM Compass platform, giving employees legal access to the entire standards library.
A method to test the watertightness of waterproofing installations on horizontal surfaces with a slope of no greater than 20 mm/m (2% slope, or 1/4 inch per foot) . This includes structures like parking garages over living spaces and plaza decks over habitable spaces. It can test a variety of membrane types, including fully adhered sheet membranes, fluid-applied membranes, and loose-laid sheet membranes. astm d595798 pdf free
Active standard
To hold water on a flat surface, containment barriers must be established.
The standard specifies maintaining the water level for a minimum continuous period of 24 hours. 4. Monitoring and Evaluation That said, I will provide a about ASTM
The water depth should generally not exceed 4 inches (100 mm) at the lowest point, unless the structure has been engineered to withstand higher loads.
The ASTM D5957 standard, titled " Standard Guide for Flood Testing Horizontal Waterproofing Installations
: Inflatable mechanical or pneumatic plugs to seal existing deck drains securely. It can test a variety of membrane types,
On highly sloped decks, achieving the required depth at the high point creates excessive depth and weight at the low point.
To provide a practical understanding, the standard outlines a specific protocol:
The water is held for a duration, commonly 24 hours , while the underside of the structural slab is monitored for signs of leakage or dampness.
B. Test all horizontal waterproofing areas prior to placement of cover boards, pavers, or topping slabs.
: Maintain the water level for a minimum continuous duration of 24 hours.