Take a picture of the login screen's date/time in case you need to use a generator later.
Wrong firmware can brick your DVR. Only attempt if the DVR has no critical footage.
: Reinsert the battery, close the case, and power on the unit. The system clock should revert to a factory default date (e.g., 2000/01/01).
Use an online DVR superpassword generator or a local utility tool compatible with generic embedded Linux DVR chipsets. traice dvr password reset exclusive
Unplug the power adapter from the back of the DVR.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
You’ll often need to find the specific "System Date" shown on the DVR’s monitor, which might differ from the actual current date if the CMOS battery is old. Take a picture of the login screen's date/time
If default passwords do not work, use these physical methods to clear the system's memory: Unplug the power and open the DVR casing. Locate the coin-sized CR2032 battery on the motherboard.
If your DVR does not have a physical button, it likely uses a system. This is a dynamic code generated based on the system's current date.
: Use the official manufacturer app (often Hik-Connect or a similar white-label platform) to scan the QR code. : Reinsert the battery, close the case, and
Input the generated master password into the DVR login screen. If successful, the system will bypass the old password and prompt you to create a new, secure administrative password immediately. Method 2: The Physical CMOS Battery Method (Hardware Reset)
Traice DVR Password Reset Exclusive: The Ultimate Recovery Guide
Many older DVRs generate a "Super Password" based on the system date.
Being locked out of your security DVR does not mean your footage is lost forever. By moving through these exclusive steps—starting from the hidden front-panel "up arrow" hack to generating a super password via the device ID—you have the tools to get back up and running.
: Open the official mobile surveillance application linked to your Traice system. Use the device management scanner to read the monitor's QR code.