: Autonomous mode is the industry standard for conducting "AP on a stick" wireless site surveys.
: Ensure the access point is powered via a standard PoE injector or a PoE-capable switch port.
The single biggest question is hardware compatibility. A "successful flash" requires a match between the firmware architecture and the AP's bootloader. Ap3g2-k9w7-tar.153-3.jbb1.tar WORK
It provides a robust operating system for environments where a controller-based, enterprise-wide setup is overkill.
: Primarily for Cisco Aironet 3700 series (e.g., AIR-CAP3702I). : Autonomous mode is the industry standard for
: This corresponds to Cisco IOS software version 15.3(3)JBB1. Common Uses
Given the 15.3(3) code base, WPA2 is the strongest native option. Example: A "successful flash" requires a match between the
the AP with a static IP address, for example: ip address 192.168.1.10 255.255.255.0 .
ap: set IP_ADDR ap: set NETMASK ap: set DEFAULT_ROUTER Use code with caution. Copied to clipboard : ap: tftp_init ap: ether_init ap: flash_init Use code with caution. Copied to clipboard
Method 2: The Hardware MODE Button Recovery (ROMMON / Bootloader)
AP# show version