Electric Hidclass 10013 Updated — Alps
While the update is often listed as "Optional," there are different schools of thought on whether you should install it:
When a card is presented, D0 and D1 will pulse low sequentially. Your microcontroller must measure pulse width (typical 50 µs low, 2 ms high for valid bits).
4. Prevent Windows from Automatically Overwriting the Driver
For most users, the safest method is to let Windows handle the installation automatically. Go to > Update & Security > Windows Update . View optional updates if available. Select the Alps HIDClass driver and click Download and install . 2. Manual Installation (If Update Fails)
The module reduces false reads in noisy RF environments. Engineers have optimized the onboard DSP (Digital Signal Processing) to filter out interference from nearby metal or electromagnetic fields. alps electric hidclass 10013 updated
Original models drew ~30 mA idle current. The updated version operates at just 18 mA idle and 45 mA active, making it ideal for IoT edge devices.
This specific version, dated roughly April 2017, was released to improve the stability of multi-touch gestures and cursor precision on Windows 10 and 11. It addresses common issues such as: Erratic cursor movement: Reducing "jumping" or lagging during navigation. Gesture Recognition:
Windows Update detects that your laptop has an Alps input component and automatically attempts to install version 10013 to ensure compatibility with newer Windows 10 or Windows 11 builds. Why Does This Driver Update Keep Failing?
It acts as a filter driver (Alps GlidePoint HID Filter) to manage how your touchpad interacts with Windows 10 and 11. While the update is often listed as "Optional,"
| Parameter | Value | |-----------|-------| | Operating Frequency | 125 kHz ± 5 kHz | | Supported Cards | HID Prox (26-bit, 34-bit, 37-bit standard) | | Read Range (max) | 12 cm with optimized 4-turn antenna | | Interface | 4-pin: Vcc, GND, Data0, Data1 (Wiegand) OR Clock/Data | | Baud Rate (serial mode) | 9600, 19200, 38400 (selectable via jumper) | | Supply Voltage | 4.5V – 5.5V DC | | Current Consumption | 18 mA (standby), 45 mA (reading) | | Operating Temperature | -20°C to +70°C | | Dimensions | 38.1 x 19.8 x 7.5 mm | | Antenna Connector | 2-pin JST or solder pads | | Certifications | FCC, CE, RoHS (updated units have REACH compliance) |
Technical Overview – [Product Name] (P/N 10013) Date: [Current Date] Prepared for: [Your Name/Dept]
Open File Explorer and navigate to the following folder path: C:\Windows\SoftwareDistribution
The Alps Electric HID Class 10013 is commonly used in various automotive applications, including: Select the Alps HIDClass driver and click Download
The driver is an optional package distributed through Microsoft Update Catalog . It primarily manages hardware communication for Alps input devices like touchpads, trackpoints, and virtual human interface devices. This specific update often appears under the Optional Updates section of Windows 10 and Windows 11.
If you searched for this term because your device is not working correctly after an update, you are likely facing a driver conflict. Here are the most common scenarios and how to fix them:
The specific version referenced—often listed in Windows Update as
