Insert the into its dedicated rear slot.
To make the unit faster or install custom launchers:
1024 x 600 or 1280 x 720 pixels (Capacitive Touch) Amplifier IC: Typically TDA7388 or YD7388 (4 x 45W Output)
When prompted for a password, try one of these standard XYAUTO codes: 8888 (Most common) 1617 123456 000000 Popular Factory Menu Tweaks: android yt9216bj-00012-v001 manual
If the unit is boot-looping:
Select the matching manufacturer name within the system menu, followed by your vehicle model and production year.
Before final installation, connect the Yellow and Red wires together to a 12V source and Black to ground to bench-test the unit. Do not plug or unplug the main harness while the unit is powered on—this can blow the internal amplifier. Insert the into its dedicated rear slot
If left and right are flipped, go to Car Settings > Camera Settings and toggle Mirror Video .
Adjust the radio frequency steps to match North America , Europe , or Japan standards. 5. Troubleshooting Common Issues Issue 1: Unit Loses Memory (Time and Radio Stations Reset)
The Yellow (Constant 12V) and Red (Switched ACC) wires are reversed. Do not plug or unplug the main harness
Ignition Switch 12V. Connect to the accessory wire. This commands the unit to sleep/wake up when the car key turns.
Houses the BACK_CVBS input and the Pink Reverse Trigger line ( BACK A6 ). The reverse trigger must be spliced into the positive wire of your car's backup light.
Constant 12V power supply directly from the battery (maintains memory and system clock).
Incorrect wiring can destroy the motherboard or drain your car battery. Always disconnect your car battery before installing.