Ericsson Mini Link Cli Commands -

These commands are used for active system management and diagnostic tests.

admin> software list # Shows active and inactive versions admin> software activate 18.2.1 # Activate a different version admin> software upgrade tftp://192.168.1.100/minilink-6352-18.2.1.bin

The Command Line Interface (CLI) for Ericsson MINI-LINK systems—including the popular MINI-LINK 6600 series MINI-LINK TN

show version : Outputs the active software release, standby software release, and bootloader versions. ericsson mini link cli commands

: Displays the current software baseline and hardware versions. Configuration & Troubleshooting

show diagnostic : Runs built-in self-tests on the processor units and internal buses. 6. Configuration Backup and Maintenance

: Type configure terminal to enter global configuration mode. These commands are used for active system management

enable → privileged mode, configure terminal → config mode.

: Tests end-to-end reachability to another network element or server.

MINI-LINK devices act as Ethernet switches. You must manage VLANs, port profiles, and QoS. enable → privileged mode, configure terminal → config

save

: When changing radio frequencies or modulation profiles, always apply the changes to the remote node first , then the local node. Doing this in reverse will break the link and lock you out of the remote node.

Displays the active, passive, and boot software versions running on the node. show alarm current Use code with caution.