Note: Do not unplug the device or close the app until the light on the extender turns solid blue again.
Before starting the update process, ensure you meet these basic requirements to prevent the device from bricking:
: Launch the Mi Home app (available on Google Play or the App Store) on your smartphone.
Position it halfway between your main router and the area with poor coverage. It should be close enough to receive a strong signal (blue light), but far enough to reach the dead zone. update xiaomi mi wifi range extender pro updated
Ensure the smartphone running the Mi Home app has at least 20% battery remaining.
Place the extender roughly halfway between your main router and the area with poor coverage.
Plug the extender into a reliable wall outlet. Do not use loose extensions. Note: Do not unplug the device or close
Ensure the extender has at least a 60% signal strength from your main router to avoid data corruption during download.
: Enter the IP into your browser and log in to the admin panel with your password.
Ensure your smartphone is connected to the same Wi-Fi network as the extender during the process. It should be close enough to receive a
The device will automatically reboot once the installation finishes. A solid blue light indicates a successful update and a healthy connection. How to Handle an Update Failure (Troubleshooting)
: Limited to the crowded 2.4GHz band, which is prone to interference and slower speeds. Half-Bandwidth Rule
Step-by-Step Guide to Update Xiaomi Mi WiFi Range Extender Pro
Sometimes, things don't go according to plan. Here are a few tips for handling common issues.
Open the Mi Home app, delete the old device profile, and set it up as a brand new device. It will prompt you to install the latest firmware during setup. Post-Update Optimizations for Maximum Speed