Phison Mpall V5.13.0c [ 2025-2026 ]

Click the button on the right side of the interface. The tool will scan your USB ports and display your drive in one of the numbered grid boxes.

Identifying your USB drive's controller is the most critical step. You cannot and should not use MPALL on a drive with a non-Phison controller, as this can permanently damage the device.

Using Phison Mpall V5.13.0c offers several benefits to device manufacturers and end-users. Some of its benefits include:

Usually named FWXXVxxx.BIN (Contains the actual controller OS). Step-by-Step Guide to Using Phison MPALL v5.13.0C Phison Mpall V5.13.0c

: Creates secure partitions, hidden volumes, or simulates CD-ROM boot drives (ISO flashing).

(Note: this is a technical, product-focused analysis of an update; check your vendor channel or release notes for any device- or region-specific caveats before applying in production.)

Under the section, select your corresponding NAND type. If unsure, leave it on "Auto-Check". Click the button on the right side of the interface

Understanding Phison MPALL V5.13.0c: The Ultimate Flash Drive Production Tool

Click the button on the right side of the interface. Your USB drive should appear in one of the numbered grid boxes. If the drive background box turns yellow, it is ready. Click the Start button in the top left corner. What to Expect During Flashing Do NOT unplug the drive while the program runs.

Using Phison MPALL V5.13.0c carries risks. If configured incorrectly, it can permanently brick your USB drive. Follow this careful sequence to safely restore your device. Step 1: Identify Your Hardware You cannot and should not use MPALL on

1. Run MPParamEdit_F1.exe 2. IC Type = Auto (or match controller) 3. Partition Mode = 2 (Public only) 4. Format = Tick + Low Level Format 5. Save .ini 6. Open main MPALL tool, load .ini, scan, start 7. Wait 5-10 minutes 8. Re-plug USB → fixed

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: Overwrites corrupted controller firmware with a clean, working version.

Run the diagnostic tool and look for the (must be Phison) and the Controller Part-Number (e.g., PS2251-07). Note down the Flash ID code and Firmware Version displayed. Step 2: Download the Matching Firmware Files MPALL requires two distinct binary files to flash a drive:

: Initializes the controller communication.