Remove the negative (black) clamp from the vehicle frame, then remove the positive (red) clamp from the battery. Safety Warnings & Maintenance Manual Monitoring:
: Remove personal metal items such as rings, bracelets, and watches to prevent accidental short circuits. 3. Step-by-Step Operating Instructions Step 1: Prepare the Battery
Remember: Use the correct battery mode, never exceed 5 seconds in Engine Start mode, and keep these instructions saved on your phone.
: Never attempt to charge a frozen battery ; move it to a warm area to thaw first. autocraft battery charger ac60cr manual free
The AC60CR is a microprocessor-controlled charger/maintainer designed for car, marine, and deep-cycle batteries. To use it safely and effectively—especially its features like automatic voltage detection, float mode, and reverse polarity protection—having the manual is essential.
Finding the exact manual for the can be tricky, as many older Autocraft models are no longer actively hosted on primary manufacturer sites. However, most Autocraft chargers follow standard safety and operating procedures for lead-acid rechargeable batteries . Essential Safety Precautions
Clean the battery terminals to ensure solid metal-to-metal contact. Remove the negative (black) clamp from the vehicle
Clip the charger clamp to the Positive (POS, P, or +) battery terminal.
For additional assistance, similar Autocraft manuals suggest contacting customer service at 1-800-621-5485 cdn.prod.website-files.com estimated charging time for a specific battery size using this charger? How To Use A Battery Charger On Your Vehicle
Charge batteries only in well-ventilated areas to disperse explosive hydrogen gas. To use it safely and effectively—especially its features
Never attempt to charge a frozen battery ; let it thaw in a warm area first.
: For slow or "trickle" charging, ideal for maintaining charge over longer periods. Manual Control
Keep cigarettes, open flames, and sparks completely away from the battery area.
: Automatically switches from charging to maintaining (float mode) when the battery reaches full capacity to prevent overcharging.
Connect the clamp to a heavy, unpainted metal part of the engine block or chassis (if charging inside the car), far away from the battery. If charging a battery removed from the vehicle, connect the black clamp directly to the negative battery post. Step 3: Select Your Settings Set the charge rate switch based on your needs: