Strands S68 Drill Press Manual __link__ -

Clean the vertical column weekly. Apply a thin film of machine oil to prevent rust and ensure smooth table travel.

| Original part | Modern replacement | |---------------|--------------------| | (13×965 mm) | AX26 (or 26″ outside length) V-belt | | Spindle bearings | 2× 6204-2RS (deep groove) or original super-precision 7204 angular contact (for metalworking). | | Return spring | Strands standard – measure inner diameter (22 mm) and use McMaster-Carr part 9414K24. | | Depth stop rod | M8×1.25 threaded rod, cut to length (120 mm). | | Feed handles (wooden ball) | 35 mm diameter beech or phenolic ball, tapped 5/16-18 (or M8). |

Never hold a workpiece by hand. The immense torque of the gear-driven spindle can instantly seize a drill bit and spin raw metal, causing catastrophic injury. Always secure workpieces using a heavy-duty drill press vise clamped securely to the T-slots. Strands S68 Drill Press Manual

8 spindle speeds ranging from 100 to 2,900 or 3,020 RPM .

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Clean the vertical column weekly

This is the most valuable page. It shows every bushing, spring, pulley, and bolt in an exploded view, complete with part numbers (e.g., "S68-14" for the return spring housing). This diagram is essential for sourcing replacement parts or machining new ones.

The S68 uses two levers on the side of the headstock to engage different gear ratios. | | Return spring | Strands standard –

Always match your RPM to the material type and drill bit diameter. Running a large bit at high RPM will burn the cutting edges and potentially shatter the tool.

Apply a few drops of light machine oil directly to the exposed quill rack and extended spindle.

The is a "pelarborrmaskin" (pillar drilling machine) known for its robust geared head design. Unlike belt-driven drills that can slip under heavy loads, the S68's geared head provides consistent torque and a wide range of precision speeds.

In the world of heavy iron, knowledge is the ultimate precision tool. Your Strands S68 will reward that knowledge with a lifetime of perfect, vibration-free holes.