The SVP-916 provides a triple-layer defense for your electrical lines:
To customize the protection levels, follow the standard programming sequence: Press and hold the SET button for 3 seconds.
The Sinotimer SVP-916 is an adjustable, 35mm DIN rail-mounted, self-resetting voltage and current protector designed for 230V single-phase electrical systems. It features dual LED displays, offering customizable over-voltage (221V–300V), under-voltage (150V–219V), and over-current protection with adjustable delay times. Read the full instruction manual on Amazon's Media Storage m.media-amazon.com
This is the most confusing part for new users. There is a physical toggle switch on the front panel. Sinotimer Svp-916 Manual Pdf
Реле защиты от перенапряжения SVP-916 63A Sinotimer
Fully adjustable thresholds for voltage, current, and action time.
The Sinotimer SVP-916 acts as an intelligent circuit breaker. It constantly monitors the incoming alternating current (AC) power supply. If the voltage or current exceeds or falls below pre-configured safety thresholds, the device instantly cuts off the power to prevent appliance damage. Once the grid stabilizes, it automatically reconnects the power after a user-defined delay. Key Specifications 230V AC (50Hz / 60Hz) The SVP-916 provides a triple-layer defense for your
150V–219V (Default: 160V)
The most common complaint is "buttons don't work." The SVP-916 has a function.
Available in 40A, 63A, and 80A current capacities. Rated Voltage: 230V AC, 50Hz/60Hz. Read the full instruction manual on Amazon's Media Storage m
—the device "tripped," cutting off power instantaneously to prevent the delicate motherboards from frying. Chapter 2: The Low-Tide Alert (Under-Voltage)
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Ensure the Neutral wire from the input connects to the N-OUT side, and the Load wire connects to the L-OUT side to complete the circuit. Tighten: Ensure all screws are tightened to avoid heating. 5. Indicator Lights and Display