Smart Pss Pc Nvr Setup _top_ Jun 2026

Using the dual-NIC method, go to Windows Firewall > Advanced Settings and disable the firewall only for the camera network interface (NIC 2). Leave the LAN interface protected.

: Ensure you are not trying to allocate space on your primary C: drive if it is running low on capacity. Run Smart PSS as an Administrator by right-clicking the shortcut and selecting "Run as Administrator." Cameras Dropping Frames or Lagging

Complete Guide to Setting Up Your NVR on Smart PSS (PC) Connecting your Network Video Recorder (NVR) to the Smart PSS software on a PC allows you to monitor your security cameras, review playback, and manage settings from your computer. Smart PSS is a professional video management system designed specifically for surveillance systems.

Ensure you have the following components ready before starting the configuration process: smart pss pc nvr setup

: Continuous recording strains local storage. Avoid using the computer for heavy gaming or video editing while the PC NVR is active. Lower the bitrate or resolution of the cameras in the camera settings menu if bandwidth is throttled. To help optimize your system, tell me: How many IP cameras are you planning to connect?

feature in SmartPSS allows you to turn your Windows PC or Mac into a recording server, enabling your computer to record video directly from IP cameras or NVRs to its local hard drive. Prerequisites SmartPSS Installed : Ensure you have installed SmartPSS SmartPSS Lite on your computer. Component Selection : During installation, you must have checked the "Storage Service" box to enable this functionality. 1. Enable PC-NVR and click the icon from the home menu. Power icon

Smart PSS’s killer feature is its AI. Here’s how to activate it. Using the dual-NIC method, go to Windows Firewall

To configure recording settings, follow these steps:

Once installed, you must configure the PC NVR application to run properly in the background and allocate storage space for video files. 1. Launch the PC NVR App

Smart PSS requires the actual password of the NVR machine, not the master password you created for the PC software initial launch. Run Smart PSS as an Administrator by right-clicking

Now that the NVR is configured, let's move on to setting up Smart PSS on your PC:

: Turns existing PC hardware into an NVR without buying a standalone unit. Hardware Intensive

This is the critical step where your PC becomes the recorder.

Is your NVR on the as your PC, or are you trying to connect remotely ?

If you enter the wrong password too many times, the NVR will temporarily lock out the IP address of the PC. Wait 30 minutes or restart the NVR to clear the lock, then re-enter the correct credentials.