Dc E2h Datasheet [portable] 〈4K × 360p〉

relies on this capacitor's Equivalent Series Resistance (ESR). X5R or X7R dielectric ceramic components are recommended for stable performance across operational temperatures. Thermal & Layout Management

A typical application circuit for the DC E2H module would include:

: Optimized for use with low-ESR ceramic capacitors (1µF recommended). Key Features

| Parameter | Typical Value | Description / Condition | | :--- | :--- | :--- | | | 1.8V (also available in 3.3V, 2.5V, etc.) | Fixed output voltage. | | Input Voltage Range | 2.5V to 5.5V | The acceptable voltage range for the input pin. | | Maximum Output Current | 300mA | The maximum current the regulator can supply. | | Dropout Voltage | ~220mV @ 300mA | The minimum difference between input and output to maintain regulation. | | Quiescent Current (Typ.) | ~90µA | Current drawn by the regulator itself at light loads. | | Output Noise (Typ.) | 50µVrms | Low noise, making it suitable for RF or audio applications. | | Packages | SOT-23-5, SOP-8, etc. | The physical package type. | | Protection Features | Over-Current, Over-Temperature, Short-Circuit | Built-in protections for robust operation. | | Operating Temperature | -40°C to +85°C | Standard industrial temperature range. | dc e2h datasheet

The standard 5-pin configuration for the surface-mount package balances thermal distribution with minimalist routing needs.

: Includes internal thermal shutdown for over-temperature protection and current limiting to prevent damage during short circuits or overloads.

RH850/E2H Electrical Characteristics User's Manual - Renesas Key Features | Parameter | Typical Value |

): Regulated Output Pin. Delivers a steady, ultra-low-noise 1.8V supply up to 300mA. Requires an output filter capacitor for system loop stability. Critical Performance Characteristics 1. Ultra-Low Noise Performance

Low power consumption, typically around 30µA to 50µA .

If your circuit derives its primary power from a noisy DC/DC step-down buck converter, high-frequency switching noise can easily bleed into your sensitive components. The DC=E2H provides 70dB of rejection at 10kHz, acting as an active low-pass electronic filter to isolate downstream logic from upstream noise. 3. Comprehensive On-Chip Protection | | Dropout Voltage | ~220mV @ 300mA

Enable pin (high for ON, low for OFF), used for power sequencing.

What is the or voltage requirements you are working with? DC=E2H PDF资料大全 - Datasheet - 电子工程世界