The exact frequency your radio broadcasts on. For simplex (radio-to-radio) communication, RX and TX are identical. For duplex (repeater) communication, TX will feature a frequency offset.
This comprehensive guide provides the standard factory frequency lists, band splits, and programming specifications for the Motorola CP1300. Motorola CP1300 Frequency Band Splits
4.5/5 stars
| Model Suffix | Band Name | Frequency Range (MHz) | Typical Use | | :--- | :--- | :--- | :--- | | | Very High Frequency | 136 - 174 MHz | Rural, outdoor, marine, long-range | | UHF | Ultra High Frequency | 403 - 470 MHz | Urban, buildings, event centers | motorola cp1300 frequency list
The frequency list for the Motorola CP1300 can be programmed into the device using a variety of methods, including:
In addition to the carrier frequencies, the CP1300 also supports tone and PL (Private Line) frequencies, which are used to identify specific talkgroups or channels. Some common tone and PL frequencies used in CP1300 radios include:
The CP1300 is a powerful (up to 5W VHF / 4W UHF) radio. In many countries, using these frequencies requires a license from the local regulatory body (e.g., FCC in the USA). The exact frequency your radio broadcasts on
If you purchase a fleet of Motorola CP1300 radios, they often ship with standard pre-programmed channels. Below are the default factory frequency profiles used for testing and baseline deployment. UHF Frequency List (Default Profile) Frequency (MHz) CTCSS/PL Tone (Hz) Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8 Channel 9 Channel 10 VHF Frequency List (Default Profile) Frequency (MHz) CTCSS/PL Tone (Hz) Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8 Interoperability: PMR446 & FRS/GMRS Lists
Decoding the Airwaves: Understanding and Utilizing the Motorola CP1300 Frequency List
or PMKN4128 cable, which plugs directly into the radio's multi-pin accessory port). In many countries, using these frequencies requires a
Even with a perfect , the radio might reject a frequency during programming. Here is why:
This is the most efficient way to clone settings across an entire fleet of radios.
If you need help building out your specific channel matrix, let me know: Are you deploying models?
If you need a custom list, follow this process:
