Press again to confirm. The Hour digits will start flashing.
: Use the UP or DOWN buttons to select your preferred 12-hour or 24-hour format.
: Even if you use USB power, inserting batteries is recommended to save your settings during power outages. How to Set the Time
The DT6507 offers two convenient ways to power your device. : Plug the included USB cable into the port on the clock and connect the other end to any standard USB power source, such as a laptop, a 5V power adapter, or a portable power bank. Using AAA Batteries : Open the battery compartment on the back of the clock and insert 3 AAA batteries. This not only powers the clock but also serves as an internal memory backup, saving your time, date, and alarm settings. When powered only by AAA batteries, the display will automatically turn off after about 16 seconds to preserve battery life. dt6507 led mirror clock instructions
When the alarm sounds, press any button except the button to activate snooze. The alarm will sound again after the designated snooze interval. To turn the alarm off completely for the day, press the MODE button. 4. Brightness Adjustment and Night Mode (CDS)
By default, the clock will dim automatically from . Quick Troubleshooting
: The provided short cable is often the only one that fits the recessed port reliably. INSTRUCTION MANUAL Press again to confirm
The clock will prompt you to choose the time format. Use or DOWN to select 12Hr (AM/PM) or 24Hr mode. Press MODE to confirm.
Pressing MODE twice will switch the display to the indoor temperature. You can toggle between Celsius and Fahrenheit using the DOWN button. Power Options
: Snoozes the alarm, adjusts display brightness, or turns the display back on. : Even if you use USB power, inserting
You will need to provide your own power source: either 3 AAA batteries or a USB power adapter (5V, 1A).
When in battery mode, if the display is off, you can activate it by clapping or making a noise, provided the device's voice control setting is active. The mirror is blurry.
: Increases values in setup menus or toggles the temperature unit (°C/°F).
: Press any button except SNZ/LIGHT to turn the alarm off for the rest of the day. 💡 Brightness and Display Settings Adjusting Brightness Manually