You will need to connect the environmental sensors (e.g., temperature/humidity probes, leak detection cables) to the designated ports on the RDU-A G2 module. Ensure that communication cables (such as RS-485 or Ethernet) are run from your UPS and cooling units to the monitoring module. Step 3: Network Configuration
The RDU-A G2 supports multiple user accounts with configurable permissions:
The RDU-A G2 host is installed using a cabinet‑mount (rack) method. Follow these steps: rdu-a g2 user manual
Use an ESD wrist strap when handling internal circuit boards to prevent electrostatic discharge damage.
Some advanced functions and expanded connection capacities require license activation. To manage licenses: You will need to connect the environmental sensors (e
The 1U rack-mountable appliance consolidates analog input (AI), digital input (DI), and digital output (DO) channels to manage environmental sensors and third-party facility hardware.
is configured primarily through its web-based management interface. 3.1 Initial Login Connect your workstation to the same network as the Go to product viewer dialog for this item. Follow these steps: Use an ESD wrist strap
Open a command prompt (CMD) and use the ping command followed by the RDU‑A G2 IP address (e.g., ping 192.168.0.254 ). A successful response indicates network connectivity.
Access the web interface by typing the configured IP address into your browser’s address bar. Navigating the Web Interface
Let’s cut through the noise. Here is exactly what you need to know about the official documentation for the .
| Button | Function | | :---: | :--- | | | Initiates the start sequence (if control enabled). | | STOP | Stops the system / Resets alarms. | | AUTO | Switches the controller to Automatic mode. | | MAN | Switches the controller to Manual mode. | | ▲ / ▼ | Scrolls through screens or adjusts values. | | ENTER | Selects a menu item or confirms a setting change. | | ESC | Returns to the previous screen or cancels an input. | | MUTE | Silences the audible alarm. |