Icom: Ic-f310 Programming Software

The Icom IC-F310 programming software is a computer program designed to configure and manage the settings of your IC-F310 radio. The software allows you to customize your radio's channels, frequencies, and other parameters to suit your specific needs.

⚠️ If you opt for a homebrew programming interface, the Highfields Amateur Radio Club notes that the IC-F310 specifically requires a combined setup using OPC-478 & OPC-592 , and it uses separate "in" and "out" contact pins that require a level converter circuit (such as a MAX232 chip) to function properly.

The software allows you to program the radio's memory channels with ease. For each channel, you can set:

The evolution of Icom’s software eventually moved toward Windows compatibility. The (or CS-F300S for the "S" model variants) is the newer cloning software. While still legacy, this software is compatible with 32-bit versions of Windows (such as Windows 98, XP, and early builds of Windows 7). The Highfields Amateur Radio Club database confirms the mapping: IC-F310 and IC-F320 utilize CS-F300, while IC-F310S and IC-F320S utilize CS-F300S. Icom Ic-f310 Programming Software

Note the COM port number assigned to your cable (e.g., COM2). If it is higher than COM4, manually change it to COM1, COM2, COM3, or COM4 in the advanced properties, as legacy software rarely recognizes high port numbers. Step 3: Run the Software and Read the Radio

The Icom IC-F310 programming software is a powerful tool that unlocks the full potential of your IC-F310 radio. By customizing your radio's settings, you can ensure clear and reliable communication, improve efficiency, and enhance security. With its user-friendly interface and range of features, the software is easy to use and essential for anyone who wants to get the most out of their IC-F310 radio.

The software (if available) runs natively on 64-bit Windows. The Icom CS-F300S may run on Windows 7 32-bit but is unstable on Windows 10/11 64-bit unless compatibility mode is enabled. The OPC-2344-1 interface is fully plug-and-play with modern Windows drivers. The Icom IC-F310 programming software is a computer

If you’ve recently acquired a used IC-F310 or are trying to reprogram a fleet, the process can seem arcane. Unlike modern ham radios that use USB-C and open-source software, the IC-F310 belongs to an era of proprietary firmware and specific handshakes. This guide will walk you through everything you need: from finding legitimate software to installing legacy drivers on Windows 10/11.

To connect your radio to a computer, you will need a combination of cables or a modern USB equivalent: OPC-478 (RS-232 type) Go to product viewer dialog for this item. : The standard cloning cable. OPC-592 Adapter Go to product viewer dialog for this item. : This adapter is required to connect the cable specifically to the .

Some advanced users reverse-engineer the cloning protocols. Forums dedicated to "BHI" (Brian MW0GKX) often have schematics for building your own programming interface, though this requires technical expertise and is typically used for extracting codeplug data rather than daily programming. The software allows you to program the radio's

Ensure you are using the correct software version designed specifically for the IC-F310/F410 series, not the newer IC-F3000 series.

The IC-F310 (VHF) and IC-F410 (UHF) share similar structures, but using software meant for a different regional variant or firmware generation will throw this error. Ensure your software specifically matches your radio's firmware revision.

I can help walk you through driver updates or setting up a if necessary. IC-F310 MANUAL.pdf - Jbe.nl