Iwata 2crh Bundy Clock Manual Work

| Part | Description | |------|-------------| | | Hinged, access to ribbon cassette and print mechanism | | Card insertion slot | Accepts standard 89mm x 188mm time cards | | Print hammer bar | Impacts ribbon against card | | Ribbon cartridge (2CRH type) | Two-color (black/red) hybrid nylon ribbon | | Setting dial | Sets current time (hours/minutes) on analog display | | Day/date lever | Advances day/date drum | | Manual trip lever | Prints a single timestamp without a card inserted (test mode) | | Front lock | Keyed access to internal adjustments |

Use only. Substitute cartridges may damage the hammer mechanism.

The top opening where the time card is automatically fed and printed. iwata 2crh bundy clock manual

Example: If your shift starts at 08:00, program code 03 for 08:01 to print . Program another entry at 17:00 for Black so evening clock-outs print normally. Press ENTER after each entry. Setting the Auto-Column Shift (Code 04)

The hour digits will flash. Adjust using or - , then press ENTER . | Part | Description | |------|-------------| | |

Slide the switch to the position. The LCD screen will flash, indicating it is ready for programming. 2. Setting the Year, Month, and Date

To make any changes to the date, time, or print settings, you will need to unlock and open the top cover. Locate the provided with your Iwata 2CRH Example: If your shift starts at 08:00, program

Change the ribbon cartridge once every 6 to 12 months, depending on the volume of employees.

Select the code. Use the corresponding indicator buttons to increase or decrease the values until the current date is accurate.

Enter programming mode and navigate to the setting. Select the alarm slot number (e.g., 01, 02, 03). Set the exact hour and minute for the bell to ring.