Motomaster Battery Charger 111568 Manual 2021 〈4K 2025〉
Disconnect the vehicle's negative battery cable to isolate the battery from the car's electrical system. Inspect the battery terminals and posts for corrosion—use a wire brush and a baking soda/water mixture to clean them if necessary. Step 2: Battery Assessment
If you lost the printed manual:
This comprehensive guide serves as an operational manual, troubleshooting reference, and safety guide for your MotoMaster battery charger. Important Safety Precautions
The MotoMaster 11-1568 (often listed with its full retail SKU 011-1568-8) is a highly reliable, classic automotive battery charger found in garages across Canada. Designed for 12V lead-acid batteries, this manual-style charger is prized for its rugged simplicity and ability to revive deeply discharged batteries that newer, ultra-sensitive smart chargers might reject. motomaster battery charger 111568 manual
Never smoke or allow sparks or flames near the battery. Do not touch the charger clamps together when the charger is on.
The proper connection sequence is the most critical part of the operation.
I can provide specific troubleshooting steps for your exact situation. Share public link Disconnect the vehicle's negative battery cable to isolate
The MotoMaster 11-1568-4 (often searched as 111568) is a versatile, fully automatic microprocessor-controlled battery charger. It is designed for charging standard lead-acid, deep-cycle, and AGM batteries commonly found in cars, trucks, RVs, and boats.
If you can't find the exact manual for the 111568, here's what you can do:
Plug the AC power cord into a properly grounded 120V wall outlet. The charger's microprocessor will immediately begin analyzing the battery and will illuminate the charging indicators. 4. Decoding the LED Indicators & Display The diagnostic display on the MotoMaster 111568 Do not touch the charger clamps together when
Connect the clamp to the positive terminal of the battery (marked POS, P, or +).
Once "FUL" is displayed or the green LED stays solid, the charger enters "Float" mode to keep the battery topped up without overcharging .
Check the outlet with another device. Ensure extension cords are properly rated and fully plugged in. Error Light / "Err" Displayed Immediately Cause: Reverse polarity connection.
If the battery is still inside the vehicle, consult your specific car manual for grounding points.