Leica Tcr805 Total Station User - Manual

Select your specific prism type (e.g., Leica Standard Round Prism has a constant of 0.0mm; Mini Prism has a constant of +17.5mm). 6. Step-by-Step Survey Operations Step-by-Step: Station Setup and Orientation

Accurate data begins with a flawless physical setup. Follow these steps to eliminate centring and leveling errors. Tripod and Tribrach Positioning

Up to 200 meters (TCR models feature a visible red laser for target acquisition without a prism).

The TCR805 uses a combination of fixed and variable keys for navigation.

First, the good news: The is a rock-solid, classic reflectorless total station. The bad news? Leica’s official support for this model has largely moved on. But don’t worry—here’s everything you need to know to find the manual, plus the key info you actually need to operate the instrument right now . leica tcr805 total station user manual

Internal memory capable of storing up to 10,000 fix points or measurements. Magnification: 30x telescope zoom. 2. Unboxing and Instrument Anatomy

The Leica TCR805 utilizes a proprietary 5-pin Lemo serial port interface located on the lower side of the housing. Data transfer is typically executed using a . Steps for Data Export

By keeping your TCR805 clean, calibrated, and properly leveled, this legendary total station will continue to deliver survey-grade precision across any job site environment.

The differences should theoretically equal exactly 180 degrees. If the deviation exceeds your tolerances, navigate to -> Tools -> Calibration and follow the on-screen prompts for the instrument to calculate and store new internal calibration constants automatically. Select your specific prism type (e

Select or enter the Point ID you wish to locate on the ground. The screen will display (the angle you need to rotate the total station) and Δcap delta Dist (how far forward or backward the prism needs to move). Rotate the instrument until reads 0° 00' 00" . Lock the horizontal motion screw. Direct your rodperson along this line of sight. Press .

Appendix: Common prism constants and adjustments

Press to measure and store the point. The Point ID will automatically increment to 101. Stakeout (Setting Out Points)

Read the distance correction (e.g., "Go Back 1.25m"). Repeat until both the angle and distance deviations read zero. Mark the ground location. 5. Electronic Distance Measurement (EDM) Settings Follow these steps to eliminate centring and leveling errors

The instrument includes a comprehensive suite of on-board application programs that guide the user through complex tasks with clear menus and prompts. These include:

Can be programmed for quick access to frequent functions like changing from Prism to Reflectorless mode, or toggling the laser pointer. MENU Key: Opens the main system settings including:

The Leica TCR805 is a robotic total station that offers high accuracy and efficiency in surveying and mapping tasks. It's designed for use in various applications, including construction, land surveying, and engineering.