Oscam: Server Config

: Credentials required to authenticate with a remote server.

[user] user = tvclient pwd = tvpass group = 1 au = 1 monlevel = 1 services = 0100;1810 maxhops = 1

: Only enable the protocols you actually use. Extra active protocols consume CPU and increase the risk of "glitching." Watch the ECM Times

oscam.conf (essential parts):

⚠️ Boxkey and RSA key are card-specific – only use for cards you own.

[reader] label = my_local_card protocol = internal device = /dev/sci0 cardmhz = 357 mhz = 357 autospeed = 0 detect = cd caid = 1234 ident = 1234:000000 group = 1 emmcache = 1,3,2 saveemm-u = 1 saveemm-s = 1

: The hardware path (like /dev/ttyUSB0 ) for local readers, or the URL/IP and port combo for remote proxies. oscam server config

Add the following content:

The oscam.server file is where the "card reader" is defined. These readers can be local hardware readers (like a physical smart card in a USB device), or network readers (like a connection to another server). Each reader is defined by a [reader] section, and multiple readers can be added to the file to manage different cards or sources.

Key sections and recommended settings:

Files kept simple for a single local USB reader and one LAN client.

Example for an internal reader or USB device:

: Set to 4000-5000 ms. Too low causes channel freezes; too high slows down zapping. : Credentials required to authenticate with a remote server

: Every reader must belong to a group (e.g., group = 1 ) to be accessible by users. 3. oscam.user (Client Accounts)

Installation methods vary, but for most Linux systems: