Dvb01: User Manual

Answer: Its measurement accuracy is less than 0.1V.

Mode F1: Voltage Monitoring (Window Comparator - Normal Close)

Positive terminal of the voltage source being measured (0-100V).

After saving the lower voltage limit, the LED display will flash rapidly three times. This confirms all variables are written to the onboard non-volatile memory. dvb01 user manual

The is a multifunctional voltage monitoring controller designed for high-accuracy direct voltage measurement (0V to 100V) and relay control. It features an industrial-grade microcontroller and offers five user-selectable functions. Core Specifications

Activating an alarm if voltage is too high or too low. F5: Fixed Point Monitoring

Relay activates when the voltage is below the low limit (P₂) and turns off when it exceeds the high limit (P₁). Answer: Its measurement accuracy is less than 0

After locking in your function mode, you need to program your operational parameters: V1 (Upper Limit), V2 (Lower Limit), and T1 (Delay Timer).

Program a 0-99.9 second delay to prevent rapid relay cycling (chatter) caused by voltage fluctuations.

The core flexibility of the DVB01 lies in its five operating modes (labeled through F-5 ). A "window" refers to the voltage range between your set lower limit (V1) and upper limit (V2). Function 1 (F-1): Voltage Measurement & Parameter Setup This confirms all variables are written to the

The module has a 4-terminal input block and a 3-terminal relay output block. Input Terminals: DC+ / DC-:

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: Inside the P-0 sub-menu, use the [+] and [-] keys to scroll through and select one of the five operating modes ( F-01 to F-05 ) described in the table above.