Finding the correct driver ensures that your system assigns a COM port to the device. Using the wrong version can lead to "Device Not Recognized" errors. 1. Official CipherLab Support Portal Always start at the official manufacturer website. Navigate to the or Support section. Search for "308 Interface Converter" or "USB to RS232."
: Alternative driver (Communication Device Class) for specific legacy or standard-compliant needs.
: For newer systems (Windows 10/11), search specifically for the "SiliconLab VCOM" or "308 USB Virtual COM" driver. Third-Party Repositories : Sites like DriverScape DriverIdentifier maintain archives for specific hardware IDs like VID_10C4&PID_EA60 🛠️ Installation Guide Disconnect the Device cipherlab 308 usbtors232 interface converter driver top
Linux creates a symbolic link for the device using its unique hardware ID. You can find it at: /dev/serial/by-id/usb-Silicon_Labs_CIPHERLAB_308_USB-to-RS232_Interface_Converter_XXXXXXXX-if00-port0 . This stable link is recommended for use in scripts or applications, as it remains constant regardless of the ttyUSB number.
Note the assigned COM port number (e.g., COM3) for use in your scanning software. Chipset Silicon Labs CP210x Interface USB 2.0 to DB9 RS232 OS Compatibility Windows (XP, 7, 8, 10, 11), Linux, and macOS Supported Devices CipherLab 150x, 156x, 166x, 18XX, 22xx, and 250x series Indicators Built-in LED for connection and data transmission status Troubleshooting Common Issues Finding the correct driver ensures that your system
He extracted the file. Setup.exe .
The beatsoft.hu user guide provides direct access to the driver pre-installer, which is highly recommended for stable installation. 3. How to Install the Driver (Step-by-Step) Official CipherLab Support Portal Always start at the
| Problem | Solution | |---------|----------| | Error 10 (device cannot start) | Uninstall driver → reboot → reinstall legacy Prolific driver (v3.3.2.105) | | COM port not created | Try different USB port or disable driver signature enforcement | | Works then disconnects | Disable USB selective suspend in Power Options | | No data from scanner | Match baud rate, parity, stop bits in your software (e.g., 9600, N, 8, 1) |
TRK-9982882... TRK-9982883...
The CipherLab 308 is an intelligent interface cable designed to connect older CipherLab devices—which only communicate via RS-232 serial protocol—to the USB ports of modern computers. It functions as an in-line USB-to-Serial converter with a controller embedded in the middle of the cable. Essentially, the 308 creates a "Virtual COM Port" on your PC, making your legacy device appear as if it's connected to a standard serial port.
If the device shows up fine in Device Manager but outputs unreadable text or nothing at all, your serial communication parameters are mismatched.