Mori Seiki Ex Alarm List __full__

The "EX" in EX alarms stands for . These alarms indicate that a condition outside the main CNC control core has been triggered.

Here are a few examples of common alarms found on the Mori Seiki EX alarm list:

Natural evaporation/consumption, or a stuck float switch in the coolant tank. EX0005: Hydraulic Oil Pressure Drop Meaning: The main hydraulic unit has lost pressure.

These errors prevent the machine from spinning the spindle if a workpiece is not securely held. mori seiki ex alarm list

The Automatic Tool Changer (ATC) arm or carousel did not complete its mechanical cycle within the allocated PLC time window.

Verify your lubricant levels and check for leaks in the air lines. Interlock Key Switch Release

When an EX alarm pops up, the machine usually stops moving for safety. It means a switch, a sensor, or a fluid level is not where it should be. Common Mori Seiki EX Alarm List The "EX" in EX alarms stands for

On the MAPPS or Fanuc screen, press the [MESSAGE] or [ALARM] hard key. EX alarms usually provide a text string (e.g., EX0501 LUBRICATION PRESSURE LOW ).

Check the way lube level, hydraulic pressure gauges, and coolant tank sight glasses.

– A general fault detected within the hydraulic system. 2. Extended EX Alarm List Reference EX0005: Hydraulic Oil Pressure Drop Meaning: The main

Understanding Mori Seiki EX Alarms: Diagnosis, Troubleshooting, and Recovery

The red light on the pendant blinked with the rhythm of a panicked heartbeat.

: Door interlock or door lock check time over.

Entry-level Dura series share simpler alarms:

Your machine's (e.g., NL2500, DuraVertical 5100) The control model (e.g., MSX-501, MAPPS, Fanuc 21i)