The device powers on but cannot boot into the Android system. It may be stuck on the Infinix boot logo, constantly restart ( bootloop ), or boot directly into Fastboot Mode .
The tool will parse the file and populate a list of partitions (boot, system, recovery, user data, etc.) in the main window.
Most INFINIX GT 20 Pro bricking issues are soft bricks caused by Magisk modules, incorrect OTA updates, or incompatible custom kernels.
Scenario 2: The "Hard Brick" (Black Screen / PC Detection Only)
Windows often blocks unsigned MediaTek drivers by default. You must disable this security feature to install the VCOM drivers properly. How to Unbrick INFINIX GT 20 Pro
You need the for the Infinix GT 20 Pro (X6871).
⚠️
during this process. Disconnecting mid-flash will cause a severe hard brick. Step 5: Reboot and Initial Setup
While holding the buttons, connect the phone to the PC via the USB cable. The device powers on but cannot boot into the Android system
If you run into any compilation errors or connectivity drops during this process, let me know:
The initial boot after a full firmware flash takes significantly longer than a regular reboot. Allow the device up to 10 minutes to load the setup wizard.
Corrupted cache files are the #1 cause of bootloops after an OTA update.
Press and hold the Power button for about 10–15 seconds until the device vibrates and restarts. Step 2: Recovery Mode (Factory Reset) Most INFINIX GT 20 Pro bricking issues are
Hold down both the and Volume Down buttons simultaneously.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Your PC cannot communicate with a bricked phone without specialized drivers. Download and install: MediaTek All-in-One USB Driver MTK VCOM Drivers 3. SP Flash Tool (Smart Phone Flash Tool)
Press and hold Power + Volume Up simultaneously.
With the phone turned off, connect it to the PC via USB while holding the or Volume Up button (depending on the firmware) to trigger the MediaTek USB port detection.