Xtra Safe Kt 82001 — Manual !!better!!

: Always test your new code with the safe door open several times before locking it to ensure the bolts retract correctly. 4. How to Use the Digital Lock Opening the Safe Enter your registered Pin Code. The green light will illuminate.

New units are shipped with a factory default code. For most Xtra Safe models, the default is 159 or 1234 .

: Slide the plastic toy security card into the designated reader slot.

A: According to manufacturers, follow a few simple rules: never expose your safe to extreme heat or moisture, avoid spilling liquids on the keypad, and replace the batteries every 12 months, even if they seem to be working. Xtra Safe Kt 82001 Manual

On the inside of the door, you will find a small lever marked "RESET."

You will hear a beep, and a yellow light on the keypad will turn on. Enter your new code: Type a secure code of 3 to 8 digits .

Use a drill to create pilot holes. Use wall anchors if mounting into drywall or brick. : Always test your new code with the

Drop your experience in the comments—we read every one.

A: Yes. The manual certifies the KT 82001 up to SIL CL 3 per IEC 61508 and PL e (Category 4) per ISO 13849-1.

Remove the safe. Drill holes at your marked locations using an appropriate drill bit (a masonry bit for concrete/brick, or a wood bit for studs). The green light will illuminate

The safe code is forgotten, and the physical override keys are lost or locked inside the safe.

The Xtra Safe manual dedicates a full page (Page 14) to this issue. The KT 82001’s tamper switch is sensitive by design. If you get random "Tamper" alerts:

Remove the batteries for at least 10–20 minutes to reset the device to its factory default code (0000). 🛠️ Usage Instructions Paper Money:

Avoid random “manual download” sites that ask for credit card info. The KT 82001 manual is free from the manufacturer.

: Hold the open lock box against the wall and mark the four screw holes using a pencil.