Hitarget V30 Plus Manual

: Once the rover receives corrections via UHF or a network (NTRIP/VRS), wait for the indicator to show a "Fixed" status, which confirms centimeter-level accuracy is ready for surveying. Hi-Target V30 Plus GNSS RTK System - Rise Geo

Open the file directory to locate the raw binary observation files (often with a .GNS or .HCN extension).

| Category | Specification | | :--- | :--- | | | 1408 channels; tracks GPS, GLONASS, BDS, Galileo, QZSS, SBAS | | RTK Accuracy | Horizontal: 8 mm + 1 ppm ; Vertical: 15 mm + 1 ppm RMS | | Static Accuracy | Horizontal: 2.5 mm + 0.5 ppm ; Vertical: 5 mm + 0.5 ppm RMS | | Communication | Bluetooth 4.0, Wi-Fi 2.4GHz, 4G modem (TDD-LTE, FDD-LTE, WCDMA) | | Physical | IP67 dust/water resistance; withstands 2-meter concrete drop; weighs ≤1.4kg |

The Hi-Target V30 Plus represents a new generation of miniaturized GNSS RTK systems. It is designed for high-precision surveying applications, such as land surveying, construction, and geographic data collection. The device is an upgraded version of the earlier V30 model, offering enhanced features like a more compact design, improved processing power, and a more modern operating system. hitarget v30 plus manual

Configure your Rover to receive corrections from your Base or a local CORS network. Internal UHF Radio Mode (Matching the Base) Go to > Rover . Data Link : Select Internal Radio .

440+ channels for advanced multi-constellation tracking.

Use the measuring tape to measure the slant height from the control point to the middle rubber ring of the V30 Plus. Record this value accurately. : Once the rover receives corrections via UHF

Select your broadcast frequency/channel (e.g., Channel 1, 460.125 MHz) and protocol (e.g., HI-TARGET or TRIMTALK).

: Open your Hi-Survey Road software, navigate to Device Settings , locate the Tilt Sensor or E-Bubble menu, and perform the guided calibration before beginning your survey. 2. Internal UHF Radio (Base or Rover Mode)

Select the appropriate mount point to begin receiving corrections. Ensure the correction type is set to for data exchange. 4. Static and Dynamic Surveying Static Survey: Internal UHF Radio Mode (Matching the Base) Go to > Rover

can feel like a big leap if you aren't familiar with its core functions. Whether you've just unboxed your unit or need a quick refresher on field operations, this guide distills the essential steps and features found in the official Hi-Target V30 Plus User Manual . Key Features at a Glance

Press and hold the power button. The system initiates its automatic self-diagnosis.

Do you need assistance with or coordinate localization ? Share public link

Ensure both units are on the identical frequency channel to prevent communication drops. Network RTK (NTRIP / CORS) Mode