Hold down the button and power up the module simultaneously to enter the calibration mode. The screen will display a flashing value next to the UINcap U cap I cap N UOUTcap U cap O cap U cap T identifier.
Connect a reliable multimeter in series with a load to the output terminals to read the exact current.
button again to switch to current setting mode. Adjust the value to your desired limit (e.g., 1.0A for LED driving). Save & Exit: twice to save or wait 10 seconds for it to auto-save. Protection Mechanisms Zk-5kx Manual
The ZK-5KX module is an outstanding piece of gear that brings lab-grade functionality to a tiny, affordable platform. With its impressive 80W of power, smart protections, and clear display, it's a reliable workhorse for the bench.
Output voltage calibration corrects the module across its entire range. Perform this calibration in two steps, ideally with a load or by following the prompts. Hold down the button and power up the
The manual began with a foreboding warning:
The only visible exhaust. The singularity generates immense Hawking radiation. The RHS vents this heat as a harmless, diffuse infrared glow, making the ZK-5KX nearly invisible to thermal sensors. button again to switch to current setting mode
A green LED indicates power on; a flashing green LED indicates step pulses are being received.
Connect a stable DC source (e.g., a 12V or 24V switching power supply) to the and VIN- terminals. Leave the output terminals disconnected.
has , making it perfect for battery charging without extra diodes. Set the voltage (CV) to the maximum voltage of the battery. Set the current (CC) limit to the maximum charging current.
Hold down the button and power up the module simultaneously to enter the calibration mode. The screen will display a flashing value next to the UINcap U cap I cap N UOUTcap U cap O cap U cap T identifier.
Connect a reliable multimeter in series with a load to the output terminals to read the exact current.
button again to switch to current setting mode. Adjust the value to your desired limit (e.g., 1.0A for LED driving). Save & Exit: twice to save or wait 10 seconds for it to auto-save. Protection Mechanisms
The ZK-5KX module is an outstanding piece of gear that brings lab-grade functionality to a tiny, affordable platform. With its impressive 80W of power, smart protections, and clear display, it's a reliable workhorse for the bench.
Output voltage calibration corrects the module across its entire range. Perform this calibration in two steps, ideally with a load or by following the prompts.
The manual began with a foreboding warning:
The only visible exhaust. The singularity generates immense Hawking radiation. The RHS vents this heat as a harmless, diffuse infrared glow, making the ZK-5KX nearly invisible to thermal sensors.
A green LED indicates power on; a flashing green LED indicates step pulses are being received.
Connect a stable DC source (e.g., a 12V or 24V switching power supply) to the and VIN- terminals. Leave the output terminals disconnected.
has , making it perfect for battery charging without extra diodes. Set the voltage (CV) to the maximum voltage of the battery. Set the current (CC) limit to the maximum charging current.