Icom Ui-7 Am Fm Unit -

$300 – $450 USD (depending on cable and mounting kit inclusions). Note: This does not include the main IC-M605 or IC-M400BB transceiver, which typically retails for $500–$800.

There is no direct clone or third-party equivalent. The UI-7 uses a proprietary resistor ladder and pulse detection that third-party manufacturers never replicated.

Ensure your radio's mode selector recognizes the new unit. On the IC-725, once the UI-7 is installed, cycling through the "Mode" button will now include FM and AM. Final Thoughts

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. icom ui-7 am fm unit

This points to misaligned IF transformers or shifted carrier frequencies inside the host radio. A complete alignment of the radio using a signal generator may be required.

There is no standard market price for the UI-7, as it is a vintage part. Its value is dictated by its rarity and condition. As a general rule, expect to pay a premium for a confirmed working unit compared to a "for parts or not working" listing. The best deals often come from private sellers who are unfamiliar with the specific value of the board, but it is essential to ask for photos of the board's pins and connectors to check for damage or corrosion.

Certain VHF/UHF variants of this era also utilize the UI-7 architecture for mode expansion. Installation Guide $300 – $450 USD (depending on cable and

When installed, the UI-7 board enables your Icom radio to in AM mode and to both transmit and receive in FM mode.

Often caused by dried-out electrolytic capacitors on the UI-7 board itself. Recapping the module usually restores full audio functionality.

You need a power supply capable of providing at a continuous current of 20 Amps (20A) to safely operate the radio. The UI-7 uses a proprietary resistor ladder and

The Icom UI-7 AM/FM Unit is an iconic piece of amateur radio history. It was a key to unlocking the full potential of some of Icom's most popular HF transceivers of the early 1990s. While long discontinued, its legacy lives on with collectors and enthusiasts who restore these classic rigs.

Without the UI-7, selecting the "FM" mode on your IC-R72 or IC-725 will result in silence or an error, as the radio lacks the discriminator circuitry to demodulate an FM signal. The UI-7 provides the necessary FM detector and squelch circuits, enabling clear, crisp reception of narrow-band FM signals. 2. Access to the 10-Meter FM Band

Unless you are a die-hard IC-706 mobile operator or a collector, the UI-7 is more of a trophy than a necessity. The IC-706’s main faceplate is only 6 inches wide—most users can simply reach it.

. While these radios were marketed as "all-mode," they initially lacked full AM and FM capabilities out of the box, requiring the UI-7 to unlock these features. Core Functionality