Canon Service Tool V3600 23

The Canon Service Tool V3600-23 is a powerful utility for advanced printer maintenance—especially waste ink counter resets, EEPROM work, and hardware diagnostics. Use it with care: back up settings first, inspect/replace physical waste pads before resetting counters, run tools with administrative rights, and seek authorized service for complex mechanical or warranty-covered repairs.

: It can initiate deep cleaning cycles and test prints that are not accessible through the standard user interface. The Barrier: Service Mode

The Canon Service Tool V3600 allows repair specialists and consumers to: Read structural operational logs (). Run targeted printing unit diagnostic tests. Reset the waste ink counter value back to 0% . Fixing Canon Printer Error 23 / E23

Every Canon consumer inkjet printer features a hidden hardware reservoir containing absorbent felt pads commonly called the These pads catch the excess ink drained out during automated printhead cleaning routines. canon service tool v3600 23

If your printer is newer than the 2015 era, this tool likely will not work. Newer printers require newer versions like v4905, v5103, or v5306. Prerequisites: Entering Service Mode (Crucial)

Community folklore and practical tips

However, I must let you know:

In the Clear Ink Counter section, click Main and then Platen to reset both sets of counters.

What it is and why people use it

Go to the top left and click to print out a diagnostic sheet confirming that the counter ( D=000.0 ) has successfully reverted to zero. The Canon Service Tool V3600-23 is a powerful

A: As many times as needed, but after 3–4 resets without adjusting the physical pads, expect an ink overflow leak.

: Dust, paper clips, or torn bits of paper inside the machine. ✅ How to Resolve Error E23

Release the button. The printer should enter Service Mode (the light should stop flashing and become a solid green or stay off). Phase 2: Running the Tool The Barrier: Service Mode The Canon Service Tool

: Drops the main and platen waste ink counters back to 0%.

Turn the printer off using the physical Power button, wait 10 seconds, and turn it back on normally. The error should now be resolved. Crucial Safety Warning: Hardware Maintenance