Qidi X-pro Manual ❲TOP-RATED — SERIES❳

The X-Pro relies on a manual three-point leveling system. Perfect bed leveling is the single most critical factor for achieving proper first-layer adhesion. [Back Center Knob] O O O [Front Left] [Front Right] The Leveling Process

The spool holder attaches to the back of the machine. Install the Dual Extruders: The

Regular maintenance ensures print reliability and extends the lifespan of your machine. Routine Maintenance

Tap to move to the third point, adjust the nut, and repeat the process one final time to verify consistency across all points. 4. Filament Loading and Unloading Loading Filament qidi x-pro manual

I can provide targeted settings or repair steps for your exact situation. Share public link

If filament stops extruding, heat the nozzle to 240°C. Use the included unclogging pin to push through the top of the extruder drive down through the nozzle tip to clear debris.

If the two colors aren't aligning, perform the "Dual Extruder Calibration" in the print settings. The X-Pro relies on a manual three-point leveling system

The QIDI X-Pro arrives mostly assembled. Follow these steps to clear shipping restraints safely:

: If you encounter bed knocking or alignment issues, you may need to manually adjust the Z-axis screws by loosening the caps at the top of the frame, raising the axis, and retightening them to ensure even alignment [5.2].

Install QIDI Print from the USB drive or download the latest version from the official QIDI Tech website. Install the Dual Extruders: The Regular maintenance ensures

Accurate bed leveling is critical for dual-extrusion printing. Because there are two nozzles, a tilted bed will cause the inactive nozzle to scrape and ruin your print. Step-by-Step Manual Leveling

"The QIDI X-Pro utilizes a sensor for automatic leveling compensation. However, you must set the Z-Offset.

Regular maintenance is crucial for the longevity and performance of the Qidi X-Pro. The manual provides detailed guidance on:

Install from the included USB drive or download the latest version from the official QIDI Tech website.

Carefully remove the printer, power cable, USB drive, and tool kit from the box.