Hand Protection: Wear chemical-resistant gloves (e.g., Nitrile or Butyl rubber).
Generally applied in two coats at a wet film thickness (WFT) of 200 microns per coat.
The exact percentages vary by batch and country regulations. Always refer to the specific MSDS provided with your shipment.
In the event of accidental exposure, the following steps should be taken immediately: nitocote nt402 msds
Proper storage preserves the shelf life of Nitocote NT402 and prevents accidental chemical reactions.
Nitocote NT402 may pose health and safety risks if not handled properly. The product contains chemical substances that can cause irritation, allergic reactions, or other adverse health effects. Potential hazards associated with Nitocote NT402 include:
– A powerful aliphatic amine cross-linker responsible for hard chemical resistance but highly sensitizing to human tissue. 2. Hazard Identification and Signal Words Hand Protection: Wear chemical-resistant gloves (e
: High risk of permanent skin sensitization if handled with bare skin. 3. Hazardous Composition Profiles
Note: Exact percentages vary by regional formulation. Always refer to the specific MSDS from your supplier.
Nitocote NT402 has the following physical and chemical properties: Always refer to the specific MSDS provided with
: May damage fertility or the unborn child (attributed to specific phthalate plasticizers). H335 : May cause respiratory irritation. H410 : Very toxic to aquatic life with long-lasting effects. Nitocote NT402 Hardener Component
The hardener is the curing agent that triggers the polymerization of the epoxy. Typical hardeners for this formulation are polyamine-based (e.g., O,O'-Bis(2-aminopropyl)polypropyleneglycol, Triethylenetetramine, and Nonylphenol).
: Contains substances that may damage fertility or harm the unborn child. Corrosivity (Hardener)
No account yet?
Create an Account
