6765 Scatter File Install Jun 2026

Extract the SP Flash Tool and run flash_tool.exe as an administrator. 2. Load the Scatter File in SP Flash Tool

Extract your specific device’s stock firmware ROM into a separate subfolder.

: The correct stock or custom ROM matching the exact model of the MT6765 device. Hardware State

Hold down the button for roughly 10 seconds to force a reboot.

Usually a driver issue. Reinstall the MediaTek VCOM drivers and try a different USB port. 6765 scatter file install

Use this when moving to a completely different Android version.

| Error Code | Message | Fix | |------------|---------|-----| | | DA boot failure | Reinstall VCOM drivers. Use USB 2.0 port. | | ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) | DRAM initialization failed | Wrong scatter file. Verify MT6765 variant (P35 vs G35). | | STATUS_PRELOADER_INVALID (0xC0030001) | Preloader mismatch | Uncheck PRELOADER in SP Flash Tool (advanced users only). | | S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (0xC0030015) | Auth file required | Use a custom DA (Download Agent) like MTK_AllInOne_DA.bin . | | ERROR : S_FT_FORMAT_FAIL (0x1720) | Format failure | Never use "Format All + Download" on MT6765. |

If you are fixing a boot loop and want a completely fresh state, ensure all partition checkboxes are ticked. Click the green button at the top of the screen.

Follow these steps carefully to load and execute the 6765 scatter file installation. Extract the SP Flash Tool and run flash_tool

Select if you are updating the core version of the Android OS.

Yes, but with caution. Advanced users edit the scatter file to:

Charge your device to at least 50% to prevent it from shutting down mid-flash. Use a high-quality, original USB cable.

The primary tool for interacting with a scatter file is the . To begin the installation process, a user must first ensure they have the correct VCOM drivers installed on their computer. These drivers allow the PC to recognize the MT6765 hardware while it is in a "Preloader" state. Without the proper handshake between the hardware and the software, the flashing process cannot initiate, often resulting in connection errors or "timeout" messages. : The correct stock or custom ROM matching

Navigate to your extracted firmware folder and select the MT6765_Android_scatter.txt file. 3. Configure Flash Settings (Crucial)

Re-install MTK VCOM drivers and try using a different USB port.

To help provide more specific troubleshooting or guidance, let me know: What is the exact of your MT6765 device?