1.820.3345.33

Microsonic Wu 102 Driver !!better!! Jun 2026

for more than 10 seconds while no target is present inside the window boundary. Maintenance and Legacy System Retrofitting

Unlike standard USB peripherals, the Wu 102 does not use a generic CDC (Communications Device Class) driver. It requires a specific INF file and low-level access to configure advanced parameters such as:

| Feature | Microsonic WU102 (Legacy Product) | Microsonic Ultrasonic Sensors (Core Business) | | :--- | :--- | :--- | | | High-Power Wireless USB Adapter | Industrial Ultrasonic Sensors & Controllers | | Primary Purpose | Extend Wi-Fi range (up to 1km) | Detect, measure, and position objects in automation | | Key Feature | High-gain (5dBi) antenna for long-range | Immune to color, transparency, dust, and dirt | | Current Status | Discontinued (as of Dec 2015) | Active and Expanding – A global market leader | | Target User | Consumer / Small Office | Industrial engineers, system integrators, OEMs | | Driver Status | Extremely difficult to find; try legacy archives or search for "WU101" replacement driver | Integrated into industrial networks (IO-Link) or controlled via LinkControl software | Microsonic Wu 102 Driver

Right-click the Silicon Labs CP210x USB to UART Bridge device and click .

—is engineered for localized, contact-free distance monitoring in harsh environments: 200 kHz for more than 10 seconds while no target

Analogue distance measurement ranging between 200 mm to 2,000 mm .

What if you cannot obtain the official driver (e.g., end-of-life support or corporate IT restrictions)? This driver creates a standard COM port (e

Used for sensors manufactured before 2018. This driver creates a standard COM port (e.g., COM3) that allows legacy software like or u-Link to communicate via RS232-to-USB converters.

: Extract the zip archive, right-click on silabser.inf , and select Install . Alternatively, run the executable installer ( CP210xVCPInstaller_x64.exe Verify the Port : Reconnect your

The easiest way to map the analog output window is by using the two physical push-buttons located on the rear of the sensor housing:

Because the sensor uses sound rather than light (like photoelectric sensors), it is impervious to target color, transparency, or ambient light conditions.

for more than 10 seconds while no target is present inside the window boundary. Maintenance and Legacy System Retrofitting

Unlike standard USB peripherals, the Wu 102 does not use a generic CDC (Communications Device Class) driver. It requires a specific INF file and low-level access to configure advanced parameters such as:

| Feature | Microsonic WU102 (Legacy Product) | Microsonic Ultrasonic Sensors (Core Business) | | :--- | :--- | :--- | | | High-Power Wireless USB Adapter | Industrial Ultrasonic Sensors & Controllers | | Primary Purpose | Extend Wi-Fi range (up to 1km) | Detect, measure, and position objects in automation | | Key Feature | High-gain (5dBi) antenna for long-range | Immune to color, transparency, dust, and dirt | | Current Status | Discontinued (as of Dec 2015) | Active and Expanding – A global market leader | | Target User | Consumer / Small Office | Industrial engineers, system integrators, OEMs | | Driver Status | Extremely difficult to find; try legacy archives or search for "WU101" replacement driver | Integrated into industrial networks (IO-Link) or controlled via LinkControl software |

Right-click the Silicon Labs CP210x USB to UART Bridge device and click .

—is engineered for localized, contact-free distance monitoring in harsh environments: 200 kHz

Analogue distance measurement ranging between 200 mm to 2,000 mm .

What if you cannot obtain the official driver (e.g., end-of-life support or corporate IT restrictions)?

Used for sensors manufactured before 2018. This driver creates a standard COM port (e.g., COM3) that allows legacy software like or u-Link to communicate via RS232-to-USB converters.

: Extract the zip archive, right-click on silabser.inf , and select Install . Alternatively, run the executable installer ( CP210xVCPInstaller_x64.exe Verify the Port : Reconnect your

The easiest way to map the analog output window is by using the two physical push-buttons located on the rear of the sensor housing:

Because the sensor uses sound rather than light (like photoelectric sensors), it is impervious to target color, transparency, or ambient light conditions.

Proceed Booking