Ensure Proteus ISIS is completely closed before copying any library files.
Since Proteus doesn't include the HX711 by default, you need to download third-party library files. These typically come in a .zip or .rar folder containing two essential file types: Contains the graphical component data.
⚠️ Avoid malicious sites. Always scan downloaded files. The library typically contains:
While useful, the community-made libraries have known limitations: hx711 proteus library
Test corner cases:
Since Proteus does not include HX711 by default, you need to download a third-party library. Several versions exist on GitHub, Instructables, and electronics forums.
C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\Data\LIBRARY Ensure Proteus ISIS is completely closed before copying
Obtain the library files (usually a .ZIP containing HX711.LIB and HX711.IDX ).
: Navigate into the folder named LIBRARY .
Connect the DOUT (Data Output) pin of the HX711 to digital pin D3 on the Arduino. Connect the PD_SCK (Power Down and Serial Clock) pin to digital pin D2 . Power Supply: Connect the VCC / VDD pins to a ⚠️ Avoid malicious sites
void loop() long reading = scale.read(); Serial.println(reading); delay(500);
Select a from the instruments toolbar to display weight output data. Wiring Connections
void setup() Serial.begin(9600); scale.begin(DOUT, CLK);
Double-check that LOADCELL_DOUT_PIN matches the physical trace connected to the Arduino model. 6. Mathematical Verification of Readings
Verify voltage dividers and gain settings (128 or 64). 🛠️ How to Install the HX711 Library in Proteus
