Once the battery is full, the charger switches to a low voltage, maintaining the battery at 100% without overcharging. 6. Troubleshooting
Proper upkeep ensures your Bradex BX60 functions reliably for years:
Once the battery is charged, it's important to disconnect in the correct order to avoid sparks.
Connect the clip to the negative battery terminal. Charging: Plug the charger into a standard 230V AC wall outlet. bradex bx60 battery charger manual full
: Attach the black (-) crocodile clip to the negative terminal. It is often recommended to connect this to a clean metal part of the vehicle chassis away from the battery to minimize spark risks.
Store the Bradex BX60 in a dry, temperature-controlled environment to prevent internal moisture damage.
Once the ammeter reads close to zero or the timer expires, turn off the power switch. Unplug the AC cord from the wall. Disconnect the negative () clamp first, followed by the positive ( Red ) clamp. Once the battery is full, the charger switches
The BX60 is intended as a trickle-and-maintenance charger rather than a high-rate jump-starter. Its core purpose is to restore charge to depleted lead-acid batteries and to keep batteries at full charge during long-term storage by supplying a controlled, low-current charge that prevents sulfation and self-discharge. Typical users are vehicle owners, hobbyists, and small-fleet operators who require a safe, low-maintenance charging solution.
Set the to match your battery (usually 12V for standard cars). Select your Charge Rate :
Disconnect the clamp from the battery or chassis ground. Disconnect the Positive (Red) clamp last. Connect the clip to the negative battery terminal
: For non-sealed batteries, remove the caps and check that the liquid level is correct. Top up with distilled or de-ionised water if necessary, wearing protective gloves. Connection Sequence Connect the crocodile clip to the positive battery terminal first. Connect the crocodile clip to the negative battery terminal second. : Plug the charger into a fused AC mains socket. Monitoring : Observe the analog
Once the clamps are securely connected, plug the Bradex BX60 into a standard mains outlet and turn it on. The indicator light on the charger should illuminate to confirm it is receiving power.