Pressure washer detergents can significantly speed up the cleaning process for oil, mold, and road grime.
to water inlet:
Hold the trigger down for 30 to 60 seconds. Air will sputter out of the wand, followed by a steady, low-pressure stream of water.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Attach the detergent nozzle or bottle. The washer will automatically draw detergent only under low-pressure settings. 5. Shut Down Procedure rok power washer instructions new
Check for kinks in the garden hose or a dirty inlet filter [33]. Unit Won't Start Tripped breaker (Electric) button on the power cord's GFCI plug [30]. for your ROK model number? Further Exploration Read user discussions on the
without pulling the trigger. The water inside the pump will heat up quickly and can crack internal seals [31]. Engine Care (Petrol Models)
Firmly squeeze the spray gun trigger with one hand to relieve backpressure while pulling the starter cord with the other.
What is the listed on its silver data plate? Pressure washer detergents can significantly speed up the
: Most models require you to click the wheel spindles into the frame and secure the handle using the provided screws or star washers [5.1, 5.3]. Hose Connections Connect your garden hose to the water inlet (usually at the front or side) [5.6, 5.7]. Connect the high-pressure hose to the pump outlet and the other end to the trigger gun Wand & Nozzles
Screw the spray wand (lance) into the trigger gun. Ensure the connection is tight. If your model uses a quick-connect system, pull back the collar, insert the wand fully, and release the collar to lock it. 2. Pre-Operation Checks (Crucial Steps)
Check that all hoses (high-pressure and garden hose) are tightly connected and free of kinks.
Switch back to a high-pressure nozzle (such as the Green 25° tip) to rinse the soap away, this time working from the top down. 7. Safe Shutdown Procedure This public link is valid for 7 days
Before you start using your ROK power washer, assemble and set it up according to the manufacturer's instructions:
Squeeze the trigger to apply the soap from the bottom up on your target surface. Let it sit for 3–5 minutes to break down dirt, but do not let it dry on the surface.
Secure the gun holster and hose hook to the side of the frame using the provided screws. Attach the High-Pressure Hose