Msi N1996 Motherboard Specifications

Disclaimer: As N1996 is a broad identifier rather than a single board, the technical specifications listed are for the most commonly associated Socket 478 board, and may vary from your specific unit, as listed on Facebook/PCTraderSA .

Common chipsets found on these boards include Intel 945GC, 945GZ, or 845E.

If your board was part of a pre-built computer, (HP, Acer, etc.) and search for the desktop model rather than the motherboard model.

The MSI N1996 Motherboard: Specification Guide and Legacy Review msi n1996 motherboard specifications

The N1996 designation appears on several different boards, primarily those supporting , Socket 775 , or sometimes even earlier Socket 370 platforms. Due to this, the exact specifications depend on the specific model number printed on the board (often located near the RAM slots, such as MS-7222, MS-7060, or MS-7250).

Any other (like MS-XXXX) printed on the board? The brand and model of the computer desktop case? The type of processor installed in it?

Most N1996 boards came in cheap OEM cases with 250W-300W power supplies. If you add a Q6600 (95W TDP) and a dedicated GPU, upgrade to a reputable 400W-450W PSU (e.g., EVGA 450 BR). Disclaimer: As N1996 is a broad identifier rather

Instead, "N1996" is an ACA (Australian Communications Authority) supplier code number. It is a regulatory compliance label indicating that the component meets specific electronic standards for sale in Australia and New Zealand. MSI printed this exact number on dozens of different motherboard models manufactured during the late 1990s and 2000s.

Renowned for long-lasting capacitors in its era. 2. Processor Support (Socket Types)

The Comprehensive Guide to MSI N1996 Motherboard Specifications The MSI N1996 Motherboard: Specification Guide and Legacy

Since many users associate "N1996" with specific older MSI or OEM boards (often found in Acer or HP systems), here are the typical specifications for the most frequent versions: 1. Intel LGA 775 Version (Common in Acer OEM)

2 to 4 SATA II (3 Gbps) ports, often accompanied by a legacy IDE connector for older hard drives and optical drives.