Pegatron 2ad5 Manual Link -

Architecturally, the 2AD5 is built on the Intel Z75 chipset, a slightly more modest sibling to the enthusiast-grade Z77. Despite being an OEM part—meaning it lacks the flashy heat sinks and RGB lighting of retail boards—its utility is undeniable. It supports the legendary Ivy Bridge i7-3770, a processor that has aged remarkably well for general productivity and light gaming. However, the

Understanding the strict limitations of the Z75 chipset on this OEM board is critical before planning any system upgrades. Processor Compatibility

PC3-10600 (DDR3-1333) or PC3-12800 (DDR3-1600). Type: Non-ECC, unbuffered memory only.

If your system fails to boot after changing hardware configurations or RAM speeds, performing a manual CMOS reset is required: Turn off the PC and unplug the power cable. pegatron 2ad5 manual link

Note on Overclocking: Although the Z75 chipset theoretically supports mild overclocking, the locked HP OEM BIOS on the Pegatron 2AD5 typically disables all CPU multiplier adjustments. Memory (RAM) Specifications Dual-channel memory architecture.

While the H61 chipset can technically handle more, the 2AD5 is hardware-limited by its two slots. You can install two 8GB sticks for a maximum of 16GB. Troubleshooting Tips

If you are preparing content for a build or repair, here are the essential specs: Form Factor: Micro-ATX (24.4 cm x 24.4 cm). Intel Z75. CPU Socket: LGA 1155 (Supports Intel 2nd and 3rd Gen Core i3/i5/i7). 4 DDR3 DIMM slots, supporting up to 32GB (non-ECC). Expansion Slots: 1 PCI Express x16 (Gen 3.0 for Ivy Bridge CPUs). 3 PCI Express x1 (Gen 2.0). 1 PCI Express Mini Card (half-length). HP Support Community 💡 User Community Tips UEFI Support: Architecturally, the 2AD5 is built on the Intel

Since the 2AD5 is often used in older Microsoft Surface or ASUS products:

is an HP proprietary motherboard, there is no official "Pegatron" public website for it. Instead, you must rely on .

1 × PCI Express x16 (Gen 3.0), 3 × PCI Express x1, 1 × PCI Express Mini Card 2 × SATA III (6.0 Gb/s), 4 × SATA II (3.0 Gb/s) Networking Integrated Realtek RTL8111E Gigabit Ethernet Audio IDT 92HD89E 7.1 Channel High Definition Audio 🧠 Processor and Memory Support However, the Understanding the strict limitations of the

Here’s how you can locate the correct manual:

: This board typically uses AMI BIOS version 7 or 8. Updates must be downloaded through the HP Support portal specific to your desktop model (e.g., Pavilion HPE h8-1360t) .

(supporting up to 4 additional front USB 2.0 ports).

To help you "put it together," here are the critical technical details for this board: